Grind

The vast array of part configurations on components require the chrome or HVOF surfaces to be ground / polished / honed / deburred after plating to achieve the desired surface...

HVOF

State of the Art Service Embee’s HVOF department is equipped with precision powder feeders, turntables, JP8000 control consoles, and robotic movement to ensure every part has repeatable precision. Our High-Velocity...

Magnetic Particle Inspection

Magnetic Particle Inspection, MPI-NDT to detect defects found in Ferro-magnetic steels and some nickel alloys

Fluorescent Penetrant Inspection

Fluorescent Penetrant Inspection, FPI-NDT for detection of defects found in all types of steel, non-ferrous alloys, some plastics and ceramic materials.

Nital Etch

Temper Etch Inspection, TE or Nital Etch Inspection, NE-NDT used for the detection of heat damaged surfaces on Carbon, Low-Alloy and Tool-Steels

Prime and Top Coat

Outfitted with 3 spray booths and dedicated curing ovens, our paint department works around the clock to provide the perfect finish to your parts. Our technicians carefully mask, spray, and...

Solid Film Lube

Dry Film Lubricants, also called solid film lubricants, are high performance coatings made up of very fine particles of molybdenum disulfide lubricating agents blended with binders and other special additives....

Fuel Tank Coatings

Fuel tank coating is a specialized application used specifically on aerospace components, It is applied to the interior of aircraft fuel tanks and protects against corrosion from fuel contaminants.

Teflon Coatings

Teflon coatings are precision applied coatings that handle the specific abrasion and environmental conditions that exist in the aerospace industry. They are typically applied at thicknesses of 0.0005”, a low...

Passivation

Passivation helps improve the corrosion resistance and restores corrosion resistance. It provides a clean surface and eliminates iron contamination and deposits left on the surface of stainless steel during metal...

Phosphates (Multiple)

Phosphate coatings are often used to provide corrosion resistance and prepare surfaces for paint as they improve paint adhesion on metal parts. The porous surface of the phosphate coatings allow...

Chemical Conversion Coatings

Chemfilm, sometimes called aluminum chromate, Alodine or Iridite, is a chemical conversion coating that is used to passivate aluminum. It protects aluminum substrates from corrosion and serves as a base...

Chrome Plating

Chrome plating has always been the hallmark of Embee’s success story and we continue to be innovators in this complex arena where experience really does make the difference. We have...

Cad Plating

Cadmium plating is a uniquely durable combination of protective properties and appearance. It imbues substrates with exceptional corrosion resistance, ductility and anti-galling characteristics. Our 5,000 sq. ft. production area offers...

Electroless Nickel Plating

Electroless Nickel has exceptional deposit uniformity, lubricity and hardness for optimal part performance. It is an ideal solution for a wide range of aerospace and commercial applications, optimizes wear resistance,...

Zinc Nickel Plating

Zinc-Nickel plating is an efficient, economical coating, with minimal environmental impact used in the protection of steel, cast iron, malleable iron, copper, and brass. Zinc-Nickel is recognized as an environmentally...

Chromic Anodize

Type I Chromic Acid Anodizing creates a thin aluminum oxide film by rapidly controlling the oxidation of an aluminum surface. The resulting aluminum oxide film is electrically non-conductive. The active...

Sulfuric Anodize

Sulfuric Anodizing is a process that provides a conversion on aluminum which changes the surface of the material to a naturally occurring aluminum oxide. The oxide build up changes the...

Boric Sulfuric Anodize

Boric-Sulfuric Acid Anodize (BSAA) is an alternative to chromic acid anodize. Primary applications include aircraft and aerospace components. It is used for corrosion protection and paint adhesion. Paint adhesion is...

Hard Anodize

Often called "Type III anodizing" this is an electrochemical process that creates a controlled oxide film on the surface of aluminum. It utilizes sulfuric acid, low bath temperatures, and high...

Shot Peen

The Curtiss Wright Metal Improvement facility located at Embee offers our customers the ability to issue a single purchase order while we handle all the part movement and inspection. Your...

IVD

The ion vapor deposition of aluminum is a vacuum plating process which ionizes and deposits high purity aluminum.The process is similar to conventional plating operations, in that it requires strict...

Vacuum Cadmium

Conventional thermal vapor deposition involves heating of cadmium in a vacuum until it vaporizes. Cadmium atoms then condense on the substrate to form a thin high quality coating of cadmium....

Quality Department

A familiar quality story. Told in many parts. Embee's QMS (Quality Management System) is AS9100 Certified. So whether your project consists of one part or thousands, you can be assured...

Testing

Our in house lab provides testing as required by specifications as well as computerized maintenance of all plating tanks and processing requirements

Additional Services

Embee offers complete, start-to-finish production capabilities designed to meet virtually any metal-finishing need. Our 124,000 sq. ft, 10-building campus provides the ultimate in one-stop convenience - a level unattainable with...

Company News

Grind

HVOF

Magnetic Particle Inspection

Fluorescent Penetrant Inspection

Nital Etch

Prime and Top Coat

Solid Film Lube

Fuel Tank Coatings

Teflon Coatings

Passivation

Phosphates (Multiple)

Chemical Conversion Coatings

Chrome Plating

Cad Plating

Electroless Nickel Plating

Zinc Nickel Plating

Chromic Anodize

Sulfuric Anodize

Boric Sulfuric Anodize

Hard Anodize

Shot Peen

IVD

Vacuum Cadmium

Quality Department

Testing

Additional Services