Sub-Process & Minimum Charge List

HVOF COATING coming soon! Watch for future updates.

Listed below are the minimum charges for the processes handled by Embee Incorporated. Links are provided to our Prime Contractor Approvals for each process, and to our facilities specifications.

Anodize | Prime Contractor Approvals| Facilities Specifications |

Process Type Minimum Charge • Chromic Anodize Type I $125.00 • Chromic Anodize Type I Dyed $125.00 • Sulfuric Anodize Type II $60.00 • Sulfuric Anodize Type II Dyed $65.00 • BAC 5019   $125.00 • Hard Anodize   $150.00 • Hard Anodize with Teflon Seal   $200.00 • Alodine Chem Film $75.00

Cadmium Plating | Prime Contractor Approvals | Facilities Specifications|

Chrome Plating | Prime Contractor Approvals | Facilities Specifications|

Process Minimum Charge • Hard Chrome $175.00 • Thin Dense Chrome $215.00

Ion Vapor Deposited Aluminum (I.V.D.)| Prime Contractor Approvals | Facilities Specifications |

Process Minimum Charge • I.V.D. - Barrel $150.00 • I.V.D. - Rack $250.00

Grinding (CNC - Conventional) | Prime Contractor Approvals | Facilities Specifications |

	Please Contact Our Sales Dept. for Pricing
	Process Minimum Charge • I.D.* Based on time • O.D* Based on time • Surface* Basde on time • Centerless* Based on time • Hone* Based on time

Nickel Plating | Prime Contractor Approvals | Facilities Specifications|

Process Minimum Charge • Bright or Dull $130.00 • Electroless Nickel $150.00 • Nickel - Tin $290.00 • Sulfamate Nickel $320.00 • Sulfamate Nickel Salvage $460.00

Embrittlement Relief  | Facilities Specifications |

Process Minimum Charge • 3 Hours, 400 Degrees F. Max.* $35.00 • 8 Hours, 400 Degrees F. Max* $40.00 • 12 Hours, 400 Degrees F. Max* $50.00 • 23 Hours, 400 Degrees F. Max* $60.00

Painting | Prime Contractor Approvals | Facilities Specifications |

	Prices do not include cost of paint
	Process Type Minimum Charge • Prime   $160.00 • Prime and Top Coat   $185.00 • Teflon Coat Teflon S $230.00 • Solid Film Lube   $150.00 • Lube Electro Film $150.00 • Corrosion Preventive Compound   $100.00 • Hot Oil   $125.00 • Powder Coating   $100.00

Phosphate Coating | Prime Contractor Approvals | Facilities Specifications |

Shot Peen | Prime Contractor Approvals |

Process Minimum Charge • Steel Shot* $85.00 • Glass Shot* $85.00

Miscellaneous

Process Type Minimum Charge • Oxide Blast   $60.00 • Glass Bead Blast   $60.00 • Black Oxide#   $120.00 • Passivate#   $45.00 • Clean   $45.00 • Silver   $200.00 • Tin   $100.00 • Copper   $200.00 • Oil   $40.00 • Degrease Liquid $50.00 • Pickle   $50.00 • Etch   $50.00 • Identify   $50.00 • Stress Relieve 3 Hours $60.00 • Source Inspection* Per Visit $75.00/Hr to $100.00/Hr • G.S.I. Inspection* Per Visit $75.00/Hr to $100.00/Hr

Non-Destructive Testing

Process Minimum Charge • Magnetic Inspection $50.00 • Pre-Penetrant Clean $45.00 • Penetrant Inspection $50.00 • Technique for MPI $45.00 • Nital Etch $90.00 • Rockwell $45.00 • Conductivity $45.00 • Copper Sulfate Test* $25.00 • Salt Spray Test* $35.00 • Water Immersion Test* $35.00 • Salt Spray* $35.00

Note: All prices shown are in U.S. Dollars.

Multiple processes are charged as follows: Highest Minimum plus 1/2 each additional minimum.

Stripping Charges are the same as the minimum process charges. Overhaul or Salvage work is not covered by this list.