Use this guide to estimate the maximum size parts that we can handle in the IVD department. All equipment is listed alphabetically. Also see our prime contractor approvals for this process. For further information, please contact our Customer Service Department.
| Type | Notes | No. Tanks | Size/Specs |
| Alodine 1200 | 1 | 30" x 10' x 6' deep | |
| Barrel Plating Set-up | 2 | 50# capacity each | |
| IVD Chambers | Work Area | 3 | 10' x 5' x 1' high |
| Rinse | Running | 1 | 30" x 10' x 6' deep |
| Rinse | Still | 1 | 30" x 10' x 6' deep |
| Rotary Rack System | 1 | 107" max. length |
Note: See section on Blast Department for all blast information
Embee is not responsible for errors or omissions from this list. Equipment is subject to change without notice. This is intended to be a rough guideline for estimating purposes only. Last updated on 02/10/05