Use this guide to estimate the maximum size parts that we can handle in the grind department. Our equipment is capable of handling parts up to 16" diameter and 72" in length. All equipment is listed alphabetically. Also see our prime contractor approvals for this process. For further information, please contact our Customer Service Department.
| Machine Type | Capacity | Manufacturer | Model | Controls |
| ID/OD Grinder | 13.6" x 40" | Studer | S-40-3 | Siemens 3G CNC |
| ID/OD Grinder | 13.6" x 40" | Studer | S-40-4 | Fanuc 16 GC |
| ID/OD Grinder | 13.6" x 35" | Studer | S-35 | Siemens 235A CNC |
| ID/OD Grinder | 13.6" x 35" | Studer | S-35 | Siemens 235A CNC |
| OD/Crush Form | 13.6" x 26" | Studer | S-40-3 | Siemens 3G CNC |
| OD Grinder | 12" x 24" | Okamoto | OGP | Fanuc 21A |
| OD Grinder | 12" x 24" | Okamoto | OGP | Fanuc 21A |
| OD Grinder | 12" x 24" | Okamoto | OGP | Fanuc 21A |
| OD Grinder | 12" x 24" | Okamoto | OGP | Fanuc 21A |
| OD Grinder | 12" x 40" | Okamoto | OGP | Fanuc 21A |
| Centerless Grinder | 5" x 6' | Cincinnati | #2 | Conventional |
| Centerless Grinder | 5" x 6' | Cincinnati | #2 | Conventional |
| Centerless Grinder | 5" x 6' | Cincinnati | #2 | Conventional |
| OD Form Grinder | 12" x 40" | Schaudt | Plain | Conventional |
| OD Grinder | 6" x 20" | Crystal Lake | Plain | Conventional |
| Surface Grinder | 8" x 18" | Max-O | 250AH | Conventional |
| Hone | 5" x 18" | Sunnen | EC-3500 | Auto Stroker |
| Hone | 5" x 18" | Sunnen | 1805 | Auto Stroker |
| Hone | 5" x 18" | Sunnen | 1660 | Auto Stroker |
SUPPORT EQUIPMENT:
Gage Talker SPC System (7 Work Stations & 2 Portable Systems)
OGP Digital Contour Projector
Standard and Digital Micrometers
Air Gaging
Standard and Digital Dial Bores
Sunnen Bore Gages
Bench Centers
Surface Plates
Digital Height Gages
Temperature Controlled
Air Evacuation System
Embee is not responsible for errors or omissions from this list. Equipment is subject to change without notice. This is intended to be a rough guideline for estimating purposes only. Last updated on 02/10/05