PRIME CONTRACTOR APPROVALS - GENERAL DYNAMICS/Convair Division (code 29321-01)

This list shows all  approvals granted to Embee by the General Dynamics/Convair Division. Also view our facilities specifications. Last updated May 09, 2000

» Anodize, Chromic

• 0-75148-1 Type I, Class 1 (code 13A06)
• 0-75148-2 Type I, Class 2 (code 13A07)

» Anodize, Hard

• 0-75148-5 Type III (code 13A10)

» Anodize, Sulfuric

• 0-75148-3 Type II, Class 1 (code 13A08)
• 0-75148-4 Type II, Class 2 (code 13A09)

» Cad

• QQ-P-416 Type I (code 13I04)
• QQ-P-416 Type II (code 13I05)
• 0-75207-1 Type I (As Plated, code 13I16)
• 0-75207-2 Type I (As Plated, code 13I17)
• 0-75207-3 Type I (As Plated, code 13I18)
• 0-75207-4 Type II (With Chromate, code 13I19)
• 0-75207-5 Type II (With Chromate, code 13I20)
• 0-75207-6 Type II (With Chromate, code 13I21)
• 0-75207-7 Type III (As Plated above RC 45, code 13I22)

» Chem Film

• 0-75141 (code 13B08)

» Chrome

• QQ-C-320 Class 2 (code 13H02)
• 0-75136-1 Type I, Class 1 (code 13H03)
• 0-75136-2 Type I, Class 2 (code 13H04)
• 0-75136-3 Type II, Class 1 (code 13H05)
• 0-75136-4 Type II, Class 2 (code 13H06)
• 0-75136-5 Type III (code 13H07)

» I.V.D.

• MIL-C-83488 Type I, II, Class 1 (code 13G01)
• MIL-C-83488 Type I, II, Class 2 (code 13G02)
• MIL-C-83488 Type I, II, Class 3 (code 13G03)

» Mag

• MIL-I-6866 Type II (code 30A14)
• ASTM-E-1444

» Nickel

• 0-73529-1 Type I (As Coated, code 13K07)
• 0-73529-2 Type II (Post-Coating Heat Treated, code 13K08)
• 0-73529-3 Type III (Aluminum Alloys, code 13K09)

» Penetrant

• MIL-STD-6866 Type I (30A01)
• ASTM-E-1417

» Pre-Penetrant Etch

• 0-75174 (Aluminum, code 30A04)

» Prime and Paint

• MIL-F-18264 (code 13R01)

» Shot Peen

• MIL-S-13165 (code 20B01)

» Solid Film Lube

• MIL-L-8937 (Heat Cured, code 13D01)
• MIL-L-46010
• 0-75046 (code 13D04)
• 0-05000 (code 13D08)

Embee is not responsible for errors or omissions from this list.