This list shows all approvals granted to Embee by Bombardier Inc./Canadair Manufacturing Division. Also view our facilities specifications. Last updated November 17, 2000
» Anodize, Chromic
- MPS 160-10
» Anodize, Hard
- MPS 160-23
» Anodize, Sulfuric
- MPS 160-32
» Clean
- MPS 180-01 (Alkaline)
- MPS 180-07 (Vapor Degrease)
- MPS 180-08 (Dry Abrasive Blast)
- MPS 180-09 (Manual Solvent Clean)
- MPS 180-11 (Cleaning & Deoxidizing of Copper Alloys)
- MPS 180-15 (Passivation)
- MPS-180-29 (Removal of Shot Peen Residue
- MPS 180-31(Acid Cleaning & Deoxidizing of Cres and Titanium)
- MPS 180-30 (Alkaline Etching of Aluminum)
- MOS 180-32 (Cleaning & Deoxidizing Aluminum)
- MPS 180-36 (Plastic Media Blasting)
» Cadmium
- MPS 160-8 (Less than 220 KSI)
- MPS 160-27 (220 KSI & Above)
» Chemical Conversion Treatment
- MPS 160-20
» Chrome
- MPS 160-9 (Less than 220 KSI)
- MPS 160-28 (220 KSI & Above)
- MPS 160-22
» Sulfuric Acid Anodize
- MPS 160-32
» Hardness & Conductivity
- MPS 168-13
» I.V.D.
- MPS 160-43
» Primer Application
- MPS 138-29
» Epoxy Primer
- MPS 138-43
» Magnetic Particle
- MPS 176-04
» Nickel, Hard
- MPS 160-16
» Nickel, Electroless
- MPS 160-26 Class 1, 3
» Nital Etch
- MPS 176-14
» Penetrant
- MPS 176-02 (Immersion Method)
» Phosphate
- MPS 160-6
» Polyurethane Application
- MPS 138-44
» Fuel Tank Coating Application
- MPS 157-26
» Solid Film Lube
- MPS 161-07
- MIL-L-46010
- MIL-L-81329
- MPS 161-06
» Solid Film Lube Application
- MPS 161-08
» Stress Relieve
- MPS 168-06
- MPS 168-15
» Water Displacing Corrosion Application
- MPS 153-03
Embee is not responsible for errors or omissions from this list.